测绘学报 ›› 2021, Vol. 50 ›› Issue (4): 436-447.doi: 10.11947/j.AGCS.2021.20200421

• 北斗导航卫星系统 • 上一篇    下一篇

北斗三号全球导航卫星系统全球广播电离层延迟修正模型(BDGIM)应用性能评估

袁运斌1,2, 李敏1,2, 霍星亮1,2, 李子申3, 王宁波3   

  1. 1. 中国科学院精密测量科学与技术究创新研究院, 湖北 武汉 430077;
    2. 大地测量与地球动力学国家重点实验室, 湖北 武汉 430077;
    3. 中国科学院光电研究院, 北京 100094
  • 收稿日期:2020-09-23 修回日期:2021-01-27 发布日期:2021-04-28
  • 作者简介:袁运斌(1971—),男,博士,研究员,研究方向为卫星导航大气延迟改正、精密定位定轨。E-mail:yybgps@whigg.ac.cn
  • 基金资助:
    国家重点研发计划(2016YFB0501900;2017YFE0131400);国家自然科学基金(42004027;41674022;41574033);王宽诚率先人才计划卢嘉锡国际团队项目

Research on performance of BeiDou global broadcast ionospheric delay correction model (BDGIM) of BDS-3

YUAN Yunbin1,2, LI Min1,2, HUO Xingliang1,2, LI Zishen3, WANG Ningbo3   

  1. 1. Innovation Academy for Precision Measurement Science and Technology, Chinese Academy of Sciences, Wuhan 430077, China;
    2. State Key Laboratory of Geodesy and Earth's Dynamics, Wuhan 430077, China;
    3. Academy of Opto-Electronics, Chinese Academy of Sciences, Beijing 100094, China
  • Received:2020-09-23 Revised:2021-01-27 Published:2021-04-28
  • Supported by:
    The National Key Research Program (Nos.2016YFB0501900;2017YFE0131400);The National Natural Science Foundation of China (Nos. 42004027;41674022;41574033);LU Jiaxi International Team Program Supported by Wang Kuancheng Pioneer Talents Project

摘要: 2020年6月23日,我国北斗三号全球导航卫星系统正式完成星座全球组网。北斗三号全球导航卫星系统采用新一代全球广播电离层延迟修正模型(BDGIM),为用户提供电离层延迟改正服务。本文利用高精度全球电离层格网(GIM)以及实测BDS/GPS数据提供的电离层TEC作为参考,从延迟改正精度及北斗单频伪距单点定位应用、模型系数性能等方面,对北斗三号系统组网前后(2020年5月1日至2020年7月20日)BDGIM模型的改正精度等应用性能进行了分析与研究,并将其与美国GPS播发的Klobuchar模型和北斗二号卫星导航系统播发的BDS Klobuchar模型进行对比。研究表明,BDGIM模型在对北斗三号系统组网完成前后电离层延迟修正精度没有发生显著变化。上述时段内,以国际GNSS服务(IGS)发布的最终GIM产品为参考,BDGIM模型在中国区域、亚太地区和全球范围内的电离层修正百分比分别达到84.45%、74.74%和64.57%;以选取的全球83个GNSS检测站BDS、GPS双频数据实测电离层TEC为参考,BDGIM在中国区域、亚太地区和全球范围内的电离层修正百分比分别为73.12%、70.18%及68.06%;当BDGIM模型应用于北斗单频伪距单点定位时,在中国区域、亚太地区和全球范围内分别实现了2.22、2.66和2.96 m的三维定位精度。

关键词: 北斗三号全球导航卫星系统, 电离层, BDGIM, 精度评估

Abstract: On June 23, 2020, the last BDS-3 satellite was launched, which means that the China BDS finished its global system construction. The BDS-3 adopts a new generation global broadcast ionospheric delay correction model (BDGIM) for the single frequency ionospheric delay correction. This paper describes the performance of BDGIM during the period before and after the establishment of the BDS-3 system, in terms of the accuracy of ionospheric delay correction, BDS single-frequency pseudorange positioning and the broadcast model coefficients. To access the performance of BDGIM, the high-precision global ionospheric map (GIM) and the measured ionospheric electron content (TEC) data are selected as references. The accuracy of GPS Klobuchar model and the BDS-2 Klobuchar model are also analyzed. The results show that the accuracy of ionospheric delay correction of the BDGIM did not change significantly before and after the completion of the BDS-3 constellation. Taking the final GIM product released by the International GNSS Service (IGS) as a reference, the ionospheric correction percentages of the BDGIM model in China, the Asia-Pacific and global regions reached 84.5%、74.6% and 64.4%, respectively. Taking the ionospheric TEC measured by BDS and GPS data of 83 global GNSS stations as a reference, the ionospheric correction percentages of BDGIM in China,Asia-Pacific and global regions are 74.3%、70.5% and 68.6%, respectively. When the BDGIM model is applied to BDS single-frequency pseudorange positioning, the three-dimensional positioning accuracy of 2.22、2.66 and 2.96 m has been achieved in China, Asia-Pacific and the global regions, respectively. Different evaluation results show that the average correction accuracy of the BDGIM model is superior to the BDS Klobuchar model and the GPS Klobuchar model.

Key words: BDS-3, ionosphere, BDGIM, precision assessment

中图分类号: