测绘学报 ›› 2016, Vol. 45 ›› Issue (6): 722-730.doi: 10.11947/j.AGCS.2016.20150352

• 地图学与地理信息 • 上一篇    下一篇

面向带洞面状对象间的拓扑关系描述模型

沈敬伟, 周廷刚, 朱晓波   

  1. 西南大学地理科学学院, 重庆 400715
  • 收稿日期:2015-07-06 修回日期:2016-01-06 出版日期:2016-06-20 发布日期:2016-06-29
  • 作者简介:沈敬伟(1984-),男,博士,副教授,硕士生导师,研究方向为空间关系理论、空间数据挖掘等。E-mail:jingweigis@163.com
  • 基金资助:
    国家自然科学基金(41301417);重庆市基础与前沿计划(cstc2014jcyjA20017);中央高校基本科研业务费专项资金资助(XDJK2015B022)

Topological Relation Representation Model between Regions with Holes

SHEN Jingwei, ZHOU Tinggang, ZHU Xiaobo   

  1. School of Geographical Sciences, Southwest University, Chongqing 400715, China Abstract
  • Received:2015-07-06 Revised:2016-01-06 Online:2016-06-20 Published:2016-06-29
  • Supported by:
    The National Natural Science Foundation of China(No. 41301417);The Basic and Frontier Project of Chongqing(No. cstc2014jcyjA20017);The Fundamental Research Funds for the Central Universities(No. XDJK2015B022)

摘要: 为研究带洞面状对象间的拓扑关系,提出了一种25IM(25交集模型)。以点集拓扑理论为基础,对带洞面状区域的内部、边界和外部进行定义。分析了9IM(9交集模型)在表达带洞面状对象间拓扑关系方面存在的问题,将带洞面状对象分为内部、外边界、内边界、外边界外部、内边界外部共5部分,提出了一种5×5的矩阵模型,即25IM。基于点集拓扑理论,定义了8条规则来排除不符合逻辑的拓扑关系。基于25IM,对8种基本拓扑关系:相离、相接、重叠、覆盖、包含、相等、被覆盖和被包含,进行细分描述。结果表明,本文提出的25IM能够更为详细地表达带洞面状对象间的拓扑关系。

关键词: 带洞面状对象, 拓扑关系, 25交集模型

Abstract: In order to study the topological relation between regions with holes, a topological relation representation model named 25IM(25 intersection model) is proposed. Based on point set theory, interior, boundary and exterior of spatial object are defined. The shortcoming of 9IM(9 intersection model) between regions with holes is analyzed. A region with holes can be separated into five parts including interior, outer boundary, inner boundary, exterior outside the outer boundary, and exterior within the inner boundary. Then, 5×5 matrix model named 25IM between two regions with holes are defined. Eight rules are defined to exclude the illogical topological relations. Eight basic topological relations, including disjoint, meet, overlaps, covers, contains, equal, coveredby and Inside, are described in detail by using 25IM. It can be concluded that the proposed 25IM can express the topological relation between regions with holes in more detail.

Key words: region with holes, topological relation, 25IM(25intersection model)

中图分类号: